After considering several different systems, the selection is made and a date is set for the new Residential AC Installation in Loughman FL. As the day approaches, it makes sense for the customer to make a few basic preparations. Here are some matters to address before the team shows up to begin the installation process.
Trim the Shrubs
Take a look around the main unit and make sure it is easy to reach. Walk all the way around the unit to ensure there is plenty of room to work without brushing up against any of the shrubs that normally hide the system from view. If there is plenty of room, then all is well. If necessary, trim the shrubs back a little and make some extra room. Doing so will make it a lot easier to move the old unit out of the way and slide the new one in position.
Protect the Floors
As the team goes about the Residential AC Installation in Loughman FL, they will have to be in and out of the house. That means tracking in a fair amount of dirt. Keep things simple by placing drop cloths over the carpeting or hardwood floors. Along with keeping the floors clean, the cloths also provide some protection if the team has to lug in new sections of ductwork as part of the installation.
Open the Way to the Attic
As part of the installation, the team will need to check all the ductwork including the air returns. Go ahead and open the entrance to the attic and ensure that the team can get in and out without a lot of trouble. If there are things stored in the attic, move them to one side so there is nothing to block access to the ductwork.
When an Ac Repair will not do the job, the only choice is to replace that old unit with a new one. Work with a local contractor for residential AC installation to determine which type of system would provide the most benefit to the household. From there, it is just a matter of setting the date for the installation and making sure everything is ready before the team arrives. Browse around here.
