Repair Tips When Water Heaters in Baltimore, MD Stop Producing Heated Water

by | Feb 6, 2014 | Heating and Air Conditioning

Most households rely on their water heater many times during a normal day. From taking baths and showers to cleaning the floors, heated water is needed to help in making sure things and people are cleaned well. In addition, heated water is needed to help in killing a variety of germs and bacteria from the surface of many items used on a daily basis. Since heated water is so important in the daily functions of a home, it can be a cause for concern when a home’s unit stops working. When this occurs, it can be necessary for the homeowner to contact a repair company who handles Water Heaters in Baltimore, MD.

One of the most common issues most homeowners face with their water heater is when the unit stops producing hot water. This can happen for a variety of reasons, but often it is something minor such as water being switched off to the unit or the electrical circuit powering the unit is flipped. These are easy fixes and most times, these minor fixes will have Water Heaters working again in a very short time.

If the unit is still not functioning correctly, the problem may be in the heating system on the unit. Most gas units rely on a pilot, pilot control valve, thermocouples and burners, while electric units rely on heating elements to heat the water. If these components are not working properly, then the water will not be heated. A repair person from a company who repairs Water Heaters in Baltimore, MD will be able to inspect these components and replace faulty elements, which may fix the problem.

Another common reason a water heater will not be able to produce hot water is sediment buildup inside the water heater tank. This can be checked by allowing some of the water in the unit to run out through the drain valve and into a bucket. Generally, a technician will be able to see the sediment or mineral deposits in the water. If this occurs, the unit will need to be flushed. This is done by emptying the tank of water and then running clean water through the system unit the water coming out of the tank is clear and free of any type of sediment. Click here for more

Post You Might Like

Categories

Archives

Related Posts