If you paint with latex-based paints, you’ll enjoy several benefits. They’re easy to use, and when it’s time to clean up, you can wash your brushes or rollers with water to get them clean. There are no terrible fumes or odors to be concerned with, and this makes latex an ideal paint for indoor surfaces. When you use latex paint, a foam roller for painting is a good selection. Let’s explore some helpful tips for painting with latex.
Sealing
Whether you’re using a brush or foam roller for painting, it’s important to seal your surface before applying the paint. In some cases, you can use a good primer paint but make sure it’s latex-based too. You can also use wallboard sealing products.
Materials
You should always choose painting tools designed for latex paints. You don’t have to spend a lot of money on mohair or lambswool rollers, but they will do a good job. Instead, you can use a quality-made foam roller for painting with latex. Make sure to choose a high-quality roller cover that has a “lint free” design. If not, you could end up with lint in your paint.
Painting
In many situations, you’ll probably be painting over previously painted surfaces. If the old paint is latex, you may be able to clean the surface well and just paint over it. However, this is not recommended for painting over oil paints.
Oil Paint Preparations
Rub some alcohol over the paint to see if any comes off. If it doesn’t, you probably have oil-based paint to cover. It’s best to sand the entire surface lightly, clean, and then use a quality brand of primer paint. You can use a foam roller for painting on primer and the top coat. In fact, it’s best to apply a coat of latex paint, then wait a few hours and apply a second coat.
